
Welcome to the official website of the First International Conference on Advanced Materials and Sustainable Technologies, ICAMST-25, will be held during 30th & 31st October 2025 in Nitte Meenakshi Institute of Technology, Bangalore, India.
The aim of this conference is to provide an interdisciplinary forum for discussion among Researchers, Engineers and Scientists in order to promote research and exchange of knowledge in Sustainable Materials and Advanced Manufacturing, Energy Systems and Green Technologies, Computational and Experimental Approaches, Emerging Trends and Future Perspectives. This conference will provide a platform for networking of Academicians, Engineers and Scientists and also will enthuse the participants to undertake high end research in the above thrust areas.
English is the official language of the conference. We welcome paper submissions. Prospective authors are invited to submit full (and original research) papers (which is NOT submitted/published/under consideration anywhere in other conferences/journal) in electronic (DOC, DOCX only) format
Disclaimer: The content of the website is subject to change. The information on hyper linked or referred to web sites is neither investigated nor analyzed by the conference organizers. No warranty or representation, express or implied, is given as to the accuracy or completeness of that information. In no event will the conference organizers accept any liability with regard to the information contained in this web site or any other hyper linked or referred to web sites.
The First International Conference on Advanced Materials and Sustainable Technologies, ICAMST-25, will be held during “30th & 31st October 2025 " in Nitte Meenakshi Institute of Technology, Bangalore, India.
ICAMST-25 provides an interdisciplinary forum for discussion among Researchers, Engineers and Scientists to promote research and exchange of knowledge in Sustainable Materials and Advanced Manufacturing, Energy Systems and Green Technologies, Computational and Experimental Approaches, Emerging Trends and Future Perspectives.
Papers at ICAMST-25 would be in the following subject areas but not limited to:
Disclaimer
ICAMST is one of the top ranked International Conferences in the country. Papers that are submitted will be subject to plagiarism checks and blind reviews. For detailed instructions for author and editors of conference proceedings, kindly visit the following link: https://www.springer.com/us/authors-editors/conference-proceedings
Select papers from the conference will be published by Springer as a proceedings book volume. Springer will conduct quality checks on the accepted papers and only papers that pass these checks will be published.
Springer Nature does not charge any money for publication of Non-Open Access content. Abstracts/extended abstracts and short papers (less than 4 pages) are not considered for publication.
Prospective authors are invited to submit full length original research papers strictly through easychair: https://easychair.org/conferences?conf=icamst25
Papers at ICAMST-25 would be in the following subject areas but not limited to:
Track-1: Next-gen materials for sustainability
Track-2: Smart and Functional materials
Track-3: Structural Performance and Testing.
To be Updated soon!
The Dates of the Conference are 30th & 31st October 2025. The dates of paper submission and other details of ICAMST-25 are as below.
Call for Papers: |
15 April 2025 |
Submission Deadline for Paper: |
24 August 2025 |
Notification of Acceptance: |
25 September 2025 |
Early Bird Registration: |
03 October 2025 |
Registration Deadline: |
15 October 2025 |
Indian Delegates | Registration Fees |
Delegates from Industry/Academia | INR. 6,000/- ( Non refundable) (Upto 8 Pages. For additional Page Rs. 200/Page has to be paid) |
Research Scholars/UG/PG Student | INR. 5,000/- ( Non refundable) (Upto 8 Pages. For additional Page Rs. 200/Page has to be paid) |
Accompanying Person | INR. 2,000/- ( Non refundable) |
Foreign Delegates | Registration Fees |
Delegates from Industry/Academia | USD 100 ( Non refundable) (Upto 8 Pages. For additional Page $10/Page has to be paid) |
Research Scholars/UG/PG Student | USD 75 ( Non refundable) (Upto 8 Pages. For additional Page $10/Page has to be paid) |
Payment will be accepted through NEFT transfer only
Name: Nitte Meenakshi Institute of Technology
Account No: 094010100165396
Account type: Savings
IFSC Code: UTIB0000094
MICR Code: 560211006
Swift Code: AXISINBB094
Permanent Account No (PAN): AAATN2284K
Bank: Axis Bank
Branch: Yelahanka
Place: Bangalore
Country: India
Dr. N. V. Hegde, President, Nitte Education Trust, Mangalore, India.
Dr. N. R. Shetty, Former- Chancellor-Central University of Karnataka, Kalaburagi and Advisor, Nitte Education Trust, Mangalore, India.
Prof. (Dr.) M S Moodithaya, Honourable -Vice Chancellor, Nitte (Deemed university), Nitte Education Trust
Dr. Sandeep Shastri, Vice President, Nitte (Deemed university), Bengaluru campus, Nitte Education Trust
Prof (Dr.) Gopal Mugeraya, Vice President (Technical Education), Nitte (Deemed university), Nitte Education Trust
Dr. H. C. Nagaraj, Principal, NMIT, Bengaluru, India.
Dr. Ramesh Babu N, Associate Prof. & Head, Dept. of ME, NMIT, Bengaluru.
Dr. P B Shetty, Mechanical Engineering, NMIT, Bengaluru
Dr. Vijay H. Desai, Mechanical Engineering, NMIT, Bengaluru
Dr. B K Muralidhara, Mechanical Engineering, NMIT, Bengaluru
Dr. Arunkumar G L, Mechanical Engineering, NMIT, Bengaluru
Dr. Abdul Rajak Buradi, Mechanical Engineering, NMIT, Bengaluru
Dr. Vijay Kumar S, Mechanical Engineering, NMIT, Bengaluru
Dr. P N Tengli, Aeronautical Engineering, NMIT, Bengaluru
Mr. Rohit Punja, Administrator, NET, Mangalore, India.
Dr. V Sridhar, Advisor, NMIT, Bengaluru
Dr. Sudheer Reddy J, Dean Academics, NMIT, Bengaluru
Dr. Kiran Aithal S, Dean, R& D, NMIT, Bengaluru
Dr Srikanth Bontha, National Institute of Technology Karnataka, Surathkal, India
Dr Ramesh MR, National Institute of Technology Karnataka, Surathkal, India.
Dr M P Jeyasekhar, Scott Christian College, India.
Dr. N. D. Shivakumar, Indian Institute of Science, Bengaluru, Karnataka, India
Dr T Ram Prabhu, DRDO, Govt of India, Bengaluru, Karnataka, India
Dr Venkateswarlu Karodi, Professor, Mechanical Engineering, DSCE, India.
Dr A Madhan Kumar, King Fahd University, Saudi Arabia
Dr. Vasu M, National Institute of Technology Tiruchirappalli, INDIA
Dr. Sachin B, National Institute of Engineering, Mysuru, Karnataka, India.
Dr Manjunath Patel GC, PES Institute of Technology and Management, Shivamogga, Karnataka, India
Dr Suresh Immanuel, University of Evansville, USA
Dr Sampath PS, K S Rangasamy College of Technology, India
Dr. Sangamesh C Godi, BMS College of Engineering, Karnataka, India
Dr Agustín Flores Cuautle, National Science and Technology Council / Instituto Tecnologico de Orizaba, Mexico
Dr Fayaz Ahamed, University of Technology and Applied Sciences, Oman
Dr Girija Shankar Mahobia, Indian Institute of Technology (BHU), Varanasi, India
Dr RVS Prasad, Botswana International University of Science and Technology, South Africa
Dr. S. M. Kulkarni, National Institute of Technology Karnataka, Surathkal, India
Dr. B. S. Murthy, Director, Indian Institute of Technology, Hyderabad, India
Dr K S Vijay Sekar, SSN College of Engineering, India
Dr Mohan Nagaraj, Dr. Ambedkar Institute of Technology, Bengaluru, Karnataka, India
Dr Ali Ercetin, Bandırma Onyedi Eylul University, Türkiye
Dr Oguzhan Der, Bandırma Onyedi Eylul University, Türkiye
Dr Vijayakumar Varadarajan, The University of New South Wales, Australia
Dr Christopher C. Enweremadu, University of South Africa, South Africa
Dr Olusegun D. Samuel, Federal University of Petroleum Resources, Effurun, Delta State, Nigeria
Dr. Natei Ermias Benti, Addis Ababa University, Ethiopia
Dr. Fatih Akkoyun, İzmir Democracy University, İzmir, Turkey
Dr. Jagadish, Indian Statistical Institute, Bangalore, Karnataka, India
Dr. Danil Yurievich Pimenov, South Ural State University, Lenin Prosp. Russia
Dr. Khaled Giasin, University of Portsmouth, Portsmouth, United Kingdom
Dr. Emanoil Linul, Politehnica University Timisoara, Timisoara, Romania
Dr. Pandu Ranga Vundavilli, Indian Institute of Technology, Bhubaneswar, India
Dr. Arun Kumar Shettigar, National Institute of Technology Karnataka, Surathkal, India
Dr. Kapil Gupta, University of Johannesburg, South Africa
Dr. Raju BS, REVA University, Bengaluru
Dr. Suresh R, M S Ramaiah University of Applied Sciences, Bangalore, India
Dr. G. L Samuel, Indian Institute of Technology, Madras, India
Dr. S Basavarajappa, University BDT College of Engineering Davangere
Dr. P. Sampathkumaran, National Design and Research Forum (NDRF) (Ex CPRI), India
Dr. S. Seetharamu, National Design and Research Forum (NDRF) (Ex CPRI), India
Dr. Sridhar V, Conference Chair
Dr. P N Tengli, Scientific Committee Chair
Dr Avinash Lakshmikanthan, Publication Committee Chair
Dr. Arun Kumar GL, Publication Committee Co-Chair
Dr. Shailesh Rao, Program Committee Chair
Dr. Kapilan N, Program Committee Chair
Dr. Ramesh Babu N, Convenor
Dr. Praveen BA, Organising Committee Member
Prof. Manjunath HN, Organising Committee Member
Dr. Harish Kumar L, Organising Committee Member
Dr Avinash L, Assistant Professor, Mechanical Engineering, NMIT, Bengaluru.
Mr. Manjunath HN, Assistant Professor, Mechanical Engineering, NMIT, Bengaluru
Dr. Sudheer Reddy J, Dean (Academics), Professor, Mechanical Engineering, NMIT, Bengaluru.
Dr. Kiran Aithal S, Dean (Research & Development), Professor, Mechanical Engineering, NMIT, Bengaluru
Dr. P N Tengli, Aeronautical Engineering, NMIT, Bengaluru
Nitte Meenakshi Institute of Technology, P.B.No.6429. Yelahanka, Bangalore 560064, Karnataka, India.
Convenor- ICAMST 2025
Associate Professor & Head
Department of Mechanical Engineering, NMIT, Bangalore-560 064
Ph: +91-7411333604
Mail: hod-mech@nmit.ac.in / rameshbabu.n@nmit.ac.in
Conference Secretary, ICAMST-2025
Assistant Professor, NMIT, Bangalore-560 064
Department of Mechanical Engineering, NMIT, Bangalore-560 064
Ph: +91-8951762147
Mail: avinash.l@nmit.ac.in